Please call us at 854-854-0049 to schedule an inspection.  See "​ADDITIONAL SERVICES" for additional inspections.

​​

Every Home Inspection Includes:

A very detailed written Home Inspection exceeding the industries standards.

​Buyback Guarantee with certificate.

​$25,000 guarantee against loss or theft during inspection.

Carbon monoxide testing at furnace and water heater.

Gas leak test at gas meter and gas fired appliances.

Infrared photography of select problem area's.

Moisture testing at select problem area's.

Analyze one circuit for false ground, voltage drop and possible loose connections and undersized wire.

96 page Home Maintenance Book.

​

Certified Mold Testing

We are one of the few IAC2 Certified Mold inspectors/Licensed Home Inspectors in the state!

​click here to verify IAC2 status
​
Mold Inspectors are required to take 3 air samples, 2 outside and 1 inside.

We take 2 outside air samples and 2 inside air samples with calibrated certified equipment and certified media. Look at the mold report below from a certified labratory and you will see mold levels vary from room to room. Only a qualified Home Inspector that is IAC2 certified can best advise on mold testing locations.

This will allow you to pinpoint only the area needing mitigation!

​Our service doesn't stop there
​
We publish the mold report within 48 hours of testing and follow up with a phone call to walk you through the report so that you understand the air quality of your new home. Notice in the report below the bedroom was the area of most concern. Had we only performed one test in the living room of this 900 sq.ft. condo (as required) we would have missed the mold contamination in the bedroom. This is why we recommend performing 2 indoor samples.
There was no visible mold in the bedroom!
mold_report.pdf
File Size: 965 kb
File Type: pdf
Download File

Infrared Certified Inspector

We will scan known problem areas with an infrared camera and provide photographs in my report of any anomalies.

Additional FULL HOUSE SCANS reveal possible plumbing leaks, heat loss, missing insulation, defective electrical circuits, defective appliances and more.  This a must do if you want a better look at walls and ceiling without being invasive.

ARTICLE ON THERMAL IMAGING